Details
Additional Information :
This CISCO WS-C3560-8PC-S 10/100Mbps + 1000Mbps Switch is in great working condition.
The unit has been fully tested and is completely functional.
Included in the Box:
Main unit, Documentation, Hardware Accessories.
Packaging:
The item is securely packaged in Brown box.
CISCO WS-C3560-8PC-S 10/100Mbps + 1000Mbps Switch /w PoE 8 Ethernet 10/100 ports Specifications:
Brand CISCO Model WS-C3560-8PC-S
Format & Standards Standards IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.3ad IEEE 802.3af IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification
Ports & Interface Primary Ports 8 Ethernet 10/100 ports and 1 dual-purpose 10/100/1000 and SFP port Primary Port Speed 10/100Mbps + 1000Mbps
Data Transmission MAC Address Table 12,000 VLAN Support Yes Jumbo Frames Yes
Details Buffer Memory 128 MB DRAM 32 MB Flash memory Cabling 10BASE-T ports: RJ-45 connectors, two-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling 10BASE-T PoE ports: RJ-45 connectors, two-pair Category 3, 4, or 5 UTP cabling power pins 1,2 (negative) and 3,6 (positive) 100BASE-TX ports: RJ-45 connectors, two-pair Category 5 UTP cabling 100BASE-TX PoE ports: RJ-45 connectors, two-pair Category 5 UTP cabling, power on pins 1,2 (negative) and 3,6 (positive) 1000BASE-T ports: RJ-45 connectors, four-pair Category 5 UTP cabling 1000BASE-T SFP-based ports: RJ-45 connectors, four-pair Category 5 UTP cabling 1000BASE-SX, -LX/LH, -ZX, and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) Cisco Catalyst 3560 SFP Interconnect Cable: two-pair shielded cabling, 50 cm Management console port: RJ-45-to-DB-9 cable for PC connections; for terminal connections, use RJ-45-to-DB-25 female data-terminal-equipment (DTE) adaptor (can be ordered separately from Cisco; part number ACS-DSBUASYN=) LEDs Per-port status LEDs: Link integrity, disabled, activity, speed, full-duplex indications, PoE applied, PoE error, and PoE disabled indications System-status LEDs: System, RPS, link status, link duplex, link speed, and PoE indications Power 100-240 VAC (autoranging), 2.5-1.3A, 50-60 Hz
Features Features Ease of Use and Deployment Superior Redundancy for Fault Backup High-Performance IP Routing Integrated CISCO IOS Software Features for Bandwidth Optimization Superior Manageability CISCO Network Assistant Software CISCO Express Setup CISCOWorks Support
Dimensions & Weight Dimensions 10.6" x 9.1" x 1.7" Weight 5.0 lbs.
Environmental Temperature 32 to 113ºF (0 to 45ºC) Humidity 10 to 85% (noncondensing)
